- General Details
- Order Inquiry
(Specification 4695, 4695G)
RECOMMENDED FOR: Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas (not to exceed 50 psi) under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit).
CAUTION: Not recommended for residential, offıce buildings or as fuel line hose on compressed natural gas vehicles. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information.
TEMPERATURE: -40°F to +180°F (-40°C to +82°C) continuous service. Warning: Do not convey LP Gas over 140°F (60°C).
CONSTRUCTION: Tube: Type A (Neoprene). 1-1/2″, 2″ and 3″. Black. Type C (Nitrile) 1-1/4″. Black.
Reinforcement: Braided, high tensile synthetic textile cord.
Cover: Type A (Neoprene). Black. All sizes are perforated.
Design Factor: 5:1
COUPLINGS: 72 Gates Power Crimp® only for 1-1/4″, 1-1/2″ and 2″ I.D. For Power Crimp ferrules, reference the Hose Coupling Section. Do not use male swivel, reusable or O-ring type couplings. For 3″ I.D. use Dixon LP Boss only.
PACKAGING: 1-1/4″: Packaged in 270′ to 330′ reels. Maximum of 3 pieces. Minimum length 25′. 1-1/2″ through 3″: Packaged 60′ in a carton.
BRANDING: Continuous molded strip brand label. Example: “Gates® Fuel MasterTM LP350 LP-Gas Hose 2 Inch Do Not Exceed 350 psi WP Made in U.S.A.”
SPECIAL ORDER REQUIREMENTS: Special production runs require minimum order quantities of 5,000 feet for 1-1/4″ and 600 feet for 1-1/2″ through 3″. Any other size in specified lengths requires a minimum production order.
REMNANT LENGTHS: None.
STANDARDS: CAN/CGA-8.1-M86. NFPA 58, Section 2-4.6. Underwriters Laboratories Standard No. 21. (Applies to all sizes).